Write At Command Station V1.0.4 [CERTIFIED | 2024]

| Feature | Specification | | :--- | :--- | | | 5V DC (via USB) | | Operating Voltage | 3.3V / 5V (Selectable or Auto-detect) | | Communication | Full Duplex Serial (RX/TX) | | Max Baud Rate | Up to 230400 bps (tested stable) | | Display | 0.96" SSD1306 OLED (I2C) - Standard Config | | Interface | Micro-USB or USB-C (depending on specific board revision) | | Dimensions | Approx. 50mm x 25mm (Stick form factor) |

Connect the Station to your target device: write at command station v1.0.4

The v1.0.4 iteration of the Command Station introduces several refinements over its predecessors, focusing on usability and hardware stability. | Feature | Specification | | :--- |

This feature enables the software to push configuration strings directly to the target station’s memory, reducing the manual steps required to set up complex layouts or device parameters. at-cmd --version # Expected output: at Command Station v1

at-cmd --version # Expected output: at Command Station v1.0.4