If the reset button pops out again immediately, the unit is still jammed (go back to Step 3) or the motor has failed.
Also, and unplug it (or flip the circuit breaker off) before attempting any manual clearing.
If the disposal won't turn on at all, it likely tripped its internal circuit breaker. Locate the on the bottom of the unit. Push it in. If it clicks, the power is restored. Prevention and Maintenance insinkerator clogged garbage disposal
Coffee grounds, eggshells, and pits dull the mechanism. If you'd like more specific help, let me know:
If you have tried the Jam-Buster wrench and cleared the P-trap but the unit still won't drain or turn on, the motor may have reached the end of its lifespan. Most InSinkErator units last between 8 to 12 years. If the reset button pops out again immediately,
If you’re not comfortable removing pipes, a can also work: Fill the sink with a few inches of water, cover the other sink drain tightly, and plunge vigorously over the disposal drain.
You’re rinsing dishes after dinner, you flip the switch for your InSinkErator garbage disposal... and nothing happens. Or worse, you hear a low humming sound, but the blades won’t turn, and the water in the sink is rising fast. Locate the on the bottom of the unit
: If the unit is not jammed but draining slowly, use a plunger. Fill the sink with 4 inches of water and use a firm, rhythmic plunging motion to clear organic clogs in the pipes. YouTube +4 4. Resetting the Motor If the disposal is unresponsive (no humming sound), it likely tripped its internal thermal overload protector. 10 sites Home Fixing a Jammed Garbage Disposal IMPORTANT * Turn off disposer and water. * Insert one end of wrenchette into center hole on bottom of disposer. Work wrenchette ba... Support Home Page