Jack knew that ASTM A307 was a widely used specification for carbon steel bolts, studs, and nuts, but he also knew that not all bolts were created equal. He had worked with bolts before that claimed to meet the ASTM A307 standard, but often, they fell short of expectations.
ASTM A307 fasteners are commonly used in various applications, including:
Rachel pulled out her copy of the ASTM A307 standard and began to read from it. "For example, the bolts must have a minimum tensile strength of 60,000 psi, and a minimum yield strength of 36,000 psi. The nuts must be made from steel that's capable of being heat-treated to a minimum hardness of 85 HRB." astm a307
The specification, maintained by ASTM International , covers the chemical and mechanical requirements for three distinct grades of fasteners. While often compared to SAE Grade 2, A307 is specifically designed for structural and industrial construction rather than automotive use. Key Mechanical Properties Tensile Strength : Minimum 60,000 psi (414 MPa).
🔩 ✅ Cost-effective ✅ Readily available ✅ Weldable and easy to install Jack knew that ASTM A307 was a widely
: Typically around 418 MPa, though this can vary by specific rod diameter and testing conditions.
ASTM A307 is the standard specification for carbon steel bolts, studs, and threaded rods with a 60,000 psi tensile strength. It is one of the most widely used industrial standards for low-carbon steel fasteners, providing a reliable and cost-effective solution for general-purpose applications where high-strength or specialized performance isn't required. What is ASTM A307? "For example, the bolts must have a minimum
Jack whistled. "Those are some pretty stringent requirements. No wonder we need to make sure we're using the right bolts."
🔩