Hiview Setup | Upd

To set up Hi-View, here are the general steps:

Before diving into software, you must ensure your recording unit is physically ready. hiview setup

Use the SADP Tool or HiView IP-Tool to detect the camera’s IP address on your network. To set up Hi-View, here are the general

: Plug the microscope into a USB port. Open the software, navigate to Device > Open , and select the camera (often listed as "GENERAL-UVC"). To set up Hi-View

For professional security surveillance, HiView provides IP cameras and Network Video Recorders (NVRs). Digital Microscope Software Support

Most HiView DVRs require internal storage. Remove the screws on the back of the NVR/DVR, open the case, and connect the SATA and power cables to your hard drive. Secure the drive with the provided screws and close the case.