94v-0e88441d Datasheet Now

The marking on a printed circuit board (PCB) or T-Con board designates Underwriters Laboratories (UL) flammability safety and manufacturer tracking classifications , rather than a standard commercial component part number. Specifically, "94V-0" signifies adherence to the rigid UL 94 plastic flammability standard , confirming that the board substrate will self-extinguish within 10 seconds during vertical burn tests and prevent flaming drips. Concurrently, "E88441" is the unique UL File Number assigned to Taiwan Printed Circuit Board Techvest Co Ltd , which serves as the registered fabricator of the bare board raw substrate.

Underwriters Laboratories (UL) Standard 94, “Tests for Flammability of Plastic Materials for Parts in Devices and Appliances,” classifies materials based on their response to a controlled vertical or horizontal flame test. The “V” denotes the vertical burn test, with ratings V-0, V-1, or V-2. A V-0 classification—the most stringent—requires that:

If the marking is indeed the full identifier, search for "E88441D" paired with the package type. 94v-0e88441d datasheet

Understanding the Role of UL 94V-0 Certification in Component Datasheets: A Methodological Approach to Material Safety and Compliance

The additional characters like "D", "MV-0S", or "0S-2S" represent raw material trace variations or distinct multi-layer stack-up geometries used by the fabrication plant. 2. Common Hardware Environments The marking on a printed circuit board (PCB)

A common error is treating “94V-0” as a primary part number. In reality, this rating appears in a datasheet’s “Materials” or “Safety and Compliance” section. The alphanumeric string “e88441d” would likely be a date code, lot traceability code, or board assembly identifier, not the device identifier. A proper search strategy includes:

Materials undergo vertical flame testing. Understanding the Role of UL 94V-0 Certification in

For the hypothetical component associated with code “e88441d,” a datasheet specifying 94V-0 compliance would certify that its plastic or epoxy body meets these criteria, reducing fire propagation risk in case of internal fault or external ignition.

The code does not refer to a specific electronic component like a chip or a transistor, but rather to the manufacturing standards and identification of a Printed Circuit Board (PCB) . Specifically, it is most commonly found on T-Con boards (Timing Controller) and source PCBs for LED/LCD televisions, such as those from Innolux and LG. Breakdown of the Code