Acpi Essx8336 Jun 2026

The ESSX8336 appears to be related to an ACPI (Advanced Configuration and Power Interface) device. ACPI is a standard for the configuration and management of computer hardware, particularly for power management and device configuration.

: Ensure that your system's drivers are up to date. You can do this through the Device Manager, right-clicking on the device, selecting "Update driver," and then searching automatically for updated driver software.

If you are searching for this ID, it is likely because you see an entry labeled in your Windows Device Manager with a yellow exclamation mark. When you check the properties, the "Hardware IDs" list contains ACPI\ESSX8336 . acpi essx8336

The hardware ID refers to the Everest Semiconductor ES8336 (also known as the ESSX8336) low-power audio codec. This chip is commonly found in modern budget laptops and tablets, such as the Huawei Matebook series, Chuwi devices, and various Intel Gemini Lake or Tiger Lake platforms.

Because fixing the ACPI tables in proprietary BIOS/firmware is impossible for end-users, the Linux kernel community developed a pragmatic solution: . The standard ASoC driver for ESSX8336 ( sound/soc/intel/boards/bytcht_es8316.c ) was extended and adapted. Developers like Pierre-Louis Bossart and the community at the Linux Audio User Group (LAU) reverse-engineered the correct hardware configurations. The ESSX8336 appears to be related to an

: Sometimes, settings in the BIOS/UEFI can affect how devices like this are managed. Look for ACPI-related settings or device-specific settings.

In the context of ACPI, a device with an ID like ESSX8336 would be managed through the ACPI interface, allowing the operating system to control and configure the device's power states, as well as other operational parameters. You can do this through the Device Manager,

The solution takes the form of a kernel parameter: acpi_quirk_force_es8336 . When this quirk is active, the kernel bypasses the broken ACPI information and injects a correct, hardcoded configuration. For example, on the popular Chuwi Hi10 Plus or Jumper EZpad tablets, users must add this parameter to their bootloader (GRUB) configuration. The kernel then correctly maps the codec to the I²S bus, sets the proper GPIO for the speaker amplifier, and initializes the audio routes.

The identifier ACPI\ESSX8336 is a hardware ID used by the Windows operating system to identify a specific piece of hardware connected to the system bus.

Many users have found that the driver package exists but the installer setup file fails to run correctly. The driver files, however, are valid. You can force-install them.

: Ensure that your operating system supports the device. Sometimes, older devices may not be supported by newer operating systems.