Epson Et 4800 Waste Ink Pad Replacement -

The waste ink pad assembly is typically found at the back of the printer, behind a small panel.

Now that the hardware is replaced, the printer still thinks the old pads are full. You must reset the counter. epson et 4800 waste ink pad replacement

Once reset, print a test page to ensure everything works. If you hear grinding noises, turn the printer off immediately and check that the pads are seated flat and no cables were pinched during reassembly. The waste ink pad assembly is typically found

. Part 1: The Mechanical Swap The waste ink pad (or maintenance box) is a reservoir containing absorbent sponges that collect excess ink from head cleaning cycles. Location: The unit is typically located behind a small cover at the back of the printer. Removal: Use a Phillips head screwdriver to remove the screw securing the outer back panel. Once the panel is off, remove the second screw holding the maintenance box itself and slide the assembly out. Installation: Slide the new ink pad assembly into place, ensuring it is properly aligned with the internal connectors. Re-secure both screws and the back panel. Pro-Tip: Always wear disposable gloves and place the old, saturated pad immediately into a plastic bag to prevent permanent ink stains on your workspace. Part 2: The Digital Reset 11 sites Epson ET 4800, 2800, 2400 & Similar Models - How To ... Aug 30, 2024 — Once reset, print a test page to ensure everything works

The ET-4800 isn’t designed for easy pad replacement. If you’re out of warranty and handy, resetting + pad replacement is possible but tedious. Most users either reset the counter and risk leaks or replace the printer entirely.