Schema Cablage Autoradio Peugeot Partner __top__ -
| Generation | Years | Common Factory Radios | Connector Type | ISO Standard? | |------------|-------|----------------------|----------------|----------------| | Partner 1 (M49) | 1996–2002 | Blaupunkt / Clarion | ISO 2-block | Yes (partially) | | Partner 2 (M59) | 2002–2008 | RD3, RD4 | ISO + Quadlock | Partial / Modified | | Partner 3 (Tepee B9) | 2008–2018 | RD4, RD5, RT6 | Quadlock (Fakra) | No (needs adapter) | | Partner 4 (K9) | 2018–present | NAC, RCC | Quadlock + MOST | No (digital amp often) |
1. Wiring for Peugeot Partner II (2008–2018) – Quadlock Connector
To keep factory stalk controls, you must use a specific patch lead (e.g., Connects2) between the vehicle harness and the new head unit. schema cablage autoradio peugeot partner
This report provides a clear pinout reference for installing an aftermarket radio (e.g., Pioneer, Sony, Kenwood) or troubleshooting the factory stereo on a Peugeot Partner van or Tepee.
| Pin | Wire Color | Function | |-----|------------|----------| | B1 | White | Front Left (+) | | B2 | White / Black | Front Left (-) | | B3 | Grey | Front Right (+) | | B4 | Grey / Black | Front Right (-) | | B5 | Green | Rear Left (+) | | B6 | Green / Black | Rear Left (-) | | B7 | Purple | Rear Right (+) | | B8 | Purple / Black | Rear Right (-) | | Generation | Years | Common Factory Radios
The document provides pinouts for the rear and mini ISO connectors of a Peugeot Siemens Clarion Blaupunkt VDO RD3-1 (PU-2471A) CD/ How to Install an Aftermarket Stereo (Peugeot 206)
Quadlock (Fakra) connector which requires an adapter for aftermarket radios. 1. ISO Connector Standard Pins If your Peugeot Partner uses the classic two-block ISO connector, the pinout is generally as follows: Power Block (Connector A - Black/Grey) Pin 4 (Yellow): Battery +12V (Constant power for memory) Pin 7 (Red): Ignition +12V (Switched power) Pin 8 (Black): Ground (Chassis negative) Pin 6 (Orange/Pink): Illumination (Dims radio when lights are on) Facebook +1 Speaker Block (Connector B - Brown) White / White-Black: Front Left (+ / -) Grey / Grey-Black: Front Right (+ / -) Green / Green-Black: Rear Left (+ / -) Purple / Purple-Black: Rear Right (+ / -) 2. Specific Peugeot Wiring Tips Inverted Power: On many Peugeot models, pins 4 and 7 are This report provides a clear pinout reference for
– The radio turns ON via CAN message from the BSI (body control unit).
| Symptom | Likely cause | |---------|---------------| | No power / no display | Missing switched ACC – use CAN-bus adapter | | Radio stays on with key out | CAN-bus missing or wrong permanent/swapped | | No sound | Amplified model (JBL) – need adapter or bypass | | Dim display | Illumination wire wrong polarity (some are negative trigger) | | Flickering | Bad ground (add separate chassis ground) |
The Peugeot Partner from ~2002 onward uses a . Incorrect wiring can: