Firstchip Fc1178/fc1179 Mptools V1.0.5.2 (2022-06-01) -

Click on the or Binning button (password is usually blank, or hit Enter).

| Error | Solution | |-------|----------| | | Reinstall driver; use USB 2.0 port; short test points (hardware repair) | | Timeout / Q0104 | Bad NAND – retry with ECC=8, or force lower capacity | | SAME FLASH ID FAIL | Controller mismatched – force FC1178 or FC1179 manually | | Low level fail 0x12 | NAND damaged – replace flash chip | | Write protected even after flash | Use "Erase All + MP" mode |

: The tool often starts in Chinese. Look for a toggle on the side panel or a dropdown menu in the top right to switch to English . firstchip fc1178/fc1179 mptools v1.0.5.2 (2022-06-01)

Are you trying to from a broken drive, or just trying to make the hardware usable again? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)

Run the diagnostic tool to check the Controller Part Number. Confirm the output explicitly lists or FC1179 . 2. Software Initialization Click on the or Binning button (password is

Rewrites the controller microcode to resolve hardware lockouts.

Select if the drive has severe sector corruption. Are you trying to from a broken drive,

Corrects issues where fake or corrupted drives display 0MB capacity.

The NAND flash memory chips may be physically damaged or unsupported by this version.