Touchwin Hmi Usb Driver Windows 10 Page

If your HMI uses a port for programming, the same drivers work. For older TouchWin models (pre-2015), you might need the CH340 driver instead – check the sticker on the back of the HMI.

– Get the official Silicon Labs CP210x Universal Windows Driver (v11.2 or newer). Avoid sketchy “driver downloader” sites.

– Once installed, the HMI should appear as a COM port (e.g., COM5). Open your HMI software (TouchWin Editor or MCGS Embedded), set the same baud rate and COM number, and download your project. touchwin hmi usb driver windows 10

Here is the complete post regarding the .

Windows 10 will block the driver by default because it lacks a digital signature. To bypass this: Go to > Update & Security > Recovery . Under Advanced startup , click Restart now . If your HMI uses a port for programming,

: This software package often includes the necessary USB drivers and is compatible with Windows XP, 7, 8, and 10. It is frequently available on automation resource sites like plchmiservo.com . 2. How to Install Touchwin USB Driver on Windows 10

: Once finished, power on your HMI and connect it to your PC. Windows should now recognize the device. Manual Installation via Device Manager Avoid sketchy “driver downloader” sites

Once your computer has rebooted with signature enforcement disabled: : Plug your Touchwin HMI into your PC using a USB cable and power it on.

Complete Guide to Touchwin HMI USB Drivers for Windows 10 Installing the correct is essential for establishing a reliable connection between your PC and Xinje (Thinget) HMI hardware. Without this driver, your computer cannot recognize the HMI, preventing you from downloading projects or monitoring real-time data through the TouchWin Edit Tool .

– Open Device Manager → look for “Unknown device” or “CP2102/CH340” with a yellow bang. Most TouchWin units use CP210x .

Finally Got the TouchWin HMI USB Driver Working on Windows 10 – Here’s What Worked