Repair Insinkerator Garbage Disposal -

The InSinkErator is a rugged machine designed to take abuse. With a simple Allen wrench and a little patience, you can usually bring yours back to life in under ten minutes—saving your sink and your wallet.

Symptoms: The disposal spins, but water sits in the sink and drains painfully slow.

A disposal that leaks from the bottom usually indicates a failed internal seal. Unfortunately, this is the one repair that signals the end of the road for the unit. Once the internal seals go, water reaches the motor bearings, leading to rust and eventual seizure.

: If the pulse isn't enough, it can automatically reverse the direction to clear the grind chamber. 2. Manual "Jam-Buster" Wrench Hole repair insinkerator garbage disposal

A leak from the bottom of the silver canister usually means the internal shaft seal has failed. You cannot repair a blown internal seal. You need a new disposal.

Symptoms: You notice water dripping from the bottom of the unit or pooling in the cabinet.

Here is your step-by-step guide to diagnosing and repairing the most common InSinkErator ailments. The InSinkErator is a rugged machine designed to take abuse

: You can use a standard 1/4-inch Allen wrench or the official Jam-Buster™ Wrench .

Symptoms: You flip the switch, and the unit makes a low humming sound but doesn't grind. Or, you flip the switch and absolutely nothing happens.

This is almost always caused by a loose object bouncing around the grind chamber—a toothpick, a screw, or a piece of bone that is too large to fit down the drain but too hard to grind. A disposal that leaks from the bottom usually

Complete Guide: How to Repair an InSinkErator Garbage Disposal

put your bare hands inside the disposal; always use tongs or pliers to remove debris. 2. Common Problem: The Disposal Hums but Won't Spin