How To Snake A Toilet With A Hanger

: Metal hangers can easily scratch the vitreous china glaze of your toilet. Always wrap the end of the wire in a rag or cloth and secure it with electrical or duct tape before inserting it.

If you hit something spongy or hairy, twist the hook into it and gently tug. If it doesn’t move, don’t Hulk out—you’ll scratch the porcelain or push the clog deeper.

: Professional plumbers often advise against this method because improper technique can crack the porcelain or puncture older, corroded pipes. Antons Plumbing and Gas +6 For more stubborn clogs, consider using a specialized toilet auger , which includes a protective sleeve specifically designed to prevent bowl damage. YouTube +1 Would you like to know more about how to snake a toilet with a hanger

Put on gloves. Lay the towel around the base of the toilet. Turn off the water supply valve (the little knob behind the toilet) to prevent surprise geysers. Flush once to lower the water level, leaving just a murky puddle.

The Coat Hanger Maneuver: A Toilet’s Last Hope Before the Plumber : Metal hangers can easily scratch the vitreous

Here is a step-by-step guide on how to safely snake a toilet using a wire hanger.

If the hanger method doesn't work, try pouring a mixture of dish soap and hot water (not boiling, as it can crack porcelain) into the bowl and letting it sit for 20 minutes to lubricate the pipes. If it doesn’t move, don’t Hulk out—you’ll scratch

Wire hangers can scratch the smooth inner surface of your toilet’s trap. Scratches give future clogs a place to grab onto, making your toilet more prone to blockages. So this trick is strictly for emergencies—like a rental deposit on the line or a single-bathroom apartment at 2 AM.

Insert the hooked end into the drain. Gently push it in while the wire. You are feeling for an obstruction. Once you hit the clog, use a push-and-pull motion to break it apart or a twisting motion to try and snag it. 4. Test the Flow