// 3. Decide if regeneration needed if ( (capacity_total - consumed) < (capacity_total * 0.15) ) // less than 15% capacity left schedule_regeneration();
// Step 6: Return to service move_valve_to(SERVICE); como programar descalcificador cillit data
// Cillit Softener Parameters float capacity_total = 1200.0; // Total hardness removal capacity (grains or °dH * liters) float flow_rate_lpm = 0.0; // Instant flow from turbine sensor (L/min) float total_flow_m3 = 0.0; // Cumulative water since last regeneration (m³) int hardness_raw = 25; // Inlet water hardness (set via installer menu, e.g., 25 °fH) int residual_hardness = 0; // Target residual (usually 0 for soft) int regeneration_time_hour = 2; // Regenerate at 2:00 AM 25 °fH) int residual_hardness = 0
Realice una regeneración manual avanzada manteniendo pulsada la tecla "R" durante 5 segundos. como programar descalcificador cillit data
| Menu | Parameter | Range | Default | |-------|-----------|-------|---------| | P01 | Water hardness (°dH) | 5 - 40 | 20 | | P02 | Number of persons | 1 - 10 | 4 | | P03 | Regeneration interval (days max) | 1 - 30 | 7 | | P04 | Regeneration time (hour) | 0 - 23 | 2 | | P05 | Salt type (NaCl / KCl) | 0/1 | 0 | | P06 | Flow meter unit (pulses/L) | 100 - 1000 | 450 |